Images, dimensions, weight, and other product details are for reference only and may vary for actual product.

To buy higher quantities of WS-C3850-12X48U-S email us at sales@d-ziner.com or call us at 833-375-8324.

New CISCO WS-C3850-12X48U-S 48 Ports Manageable Layer 3 Supported Network Switch

MPN: WS-C3850-12X48U-S | UPC: 0 882658763144 | CONDITION: New

What is the price of WS-C3850-12X48U-S?

$4,920.00

Free Ground Shipping to USA

Stock
Availability: 2 in stock

Payments processed via Stripe Payments Gateway. Only Mastercard, Visa, American Express are accepted. Bank wire option also available upon request.

Major Credit Cards Accepted

Free Ground Shipping in USA

Secure Payments

Safe Checkout

Product details for WS-C3850-12X48U-S

1. What are the weight and dimensions for WS-C3850-12X48U-S?

Weight	18 lbs
Dimensions	20 × 18 × 2 in
SKU	WS-C3850-12X48U-S
Condition	New
Brand	CISCO
GTIN	0 882658763144

2. What is the warranty for WS-C3850-12X48U-S?

The warranty for refurbished units is 30 days.
The warranty for New units is as per the manufacturer’s terms and conditions.

Cisco Catalyst 3850 Series WS-C3850-12X48U-S – Switch – L3 – managed – 48 x 10/100/1000 (UPOE) – desktop, rack-mountable – UPOE (630 W)

Cisco unified access is the convergence of the wired and wireless networks into one physical infrastructure. It offers greater intelligence, simplicity, performance, and open interfaces. One network starts with Cisco Catalyst 3850 switches, which combine wired and wireless by supporting wireless tunnel termination and full wireless LAN controller functionality.

The Catalyst 3850 series switches are Ethernet switches to which you can connect devices such as Cisco IP phones, Cisco wireless access points, workstations, and other network devices such as servers, routers, and other switches. The Catalyst 3850 switches support stacking through Cisco StackWise-480 technology and power management through StackPower.

Key Selling Points

Distributed intelligent services
Foundation for Cisco open network environment

Catalyst 3850 Configuration Guide

There are a few steps you can follow to configure a Cisco Catalyst 3850 switch:

Connect to the switch through the console or via a network management interface, such as Telnet or SSH.
Enter privileged mode by typing “enable” and entering the enable password.
Configure basic settings, such as the hostname, IP address, and default gateway, by using the “configure terminal” command and the appropriate subcommands.
Configure VLANs and ports as necessary by using the “interface” command and the appropriate subcommands.
Configure advanced features, such as Quality of Service (QoS), Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP), by using the appropriate commands.
Save the configuration by typing “write memory” or “copy running-config startup-config”.

Note that these are general steps and the specific commands and configuration options may vary depending on the software version running on the switch and the specific requirements of your network.

Catalyst 3850 Port Numbering

The port numbering starts from the first port on the far left, top. So, the first port is 1/1 and the port below it will be 1/2, the next port on the top will be 1/3 and the one below is 1/4 and so on….. This is if the blade is inserted in slot 1 but if the blade is inserted in slot 2 than the first number starts with 2 e.g 2/1, 2/2, 2/3, 2/4 and so on.

Many switch models have the order of the ports indicated, as you can see in this image. This order is the same on the other switches.

Product Description	Cisco Catalyst 3850 Series WS-C3850-12X48U-S – switch – 48 ports – managed – rack-mountable
Device Type	Switch – 48 ports – L3 – managed – stackable
Enclosure Type	Rack-mountable 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 (UPOE)
Power Over Ethernet (PoE)	UPOE
PoE Budget	630 W
Performance	Switching capacity: 176 Gbps – Stacking bandwidth: 480 Gbps – Forwarding performance (64-byte packet size): 460 Mpps
Capacity	IPv4 routes: 24000 – NetFlow entries: 48000 – Switched virtual interfaces (SVIs): 1000
MAC Address Table Size	32000 entries
Jumbo Frame Support	9198 bytes
Routing Protocol	RIP-1, RIP-2, EIGRP, RIPng
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI
Features	Auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), STP Root Guard, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Energy Efficient Ethernet, Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at
Power	AC 120/230 V (50/60 Hz)
Power Redundancy	Optional
Dimensions (WxDxH)	17.5 in x 19.2 in x 1.8 in
Weight	17.64 lbs
Manufacturer Warranty	Limited lifetime warranty

General

Device Type	CISCO Catalyst 3850 Series Switch – 48 ports – L3 – managed – stackable
Enclosure Type	Desktop, rack-mountable 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 (UPOE)
Power Over Ethernet (PoE)	UPOE
PoE Budget	630 W
Performance	Switching capacity: 176 Gbps – Stacking bandwidth: 480 Gbps – Forwarding performance (64-byte packet size): 460 Mpps
Capacity	IPv4 routes: 24000 – NetFlow entries: 48000 – Switched virtual interfaces (SVIs): 1000
MAC Address Table Size	32000 entries
Jumbo Frame Support	9198 bytes
Routing Protocol	RIP-1, RIP-2, EIGRP, RIPng
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI
Authentication Method	Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Features	Auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), STP Root Guard, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Energy Efficient Ethernet, Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at
RAM	4 GB
Flash Memory	2 GB
Status Indicators	Port transmission speed, port duplex mode, system, status, PoE

Expansion / Connectivity

Interfaces	36 x 1000Base-T RJ-45 UPOE – 60 W – 1 x USB Type A – 1 x management (mini-USB) Type B – 1 x serial (RS-232) RJ-45 management – 1 x management (Gigabit LAN) RJ-45 – 2 x network stack device – 12 x 1/2.5/5/10GBase-T RJ-45 UPOE – 60 W
Expansion Slots	1 (total) / 1 (free) x expansion slot

Power

Power Device	Internal power supply
Installed Qty	1 (installed) / 2 (max)
Power Redundancy	Optional
Power Redundancy Scheme	1+1 (with optional power supply)
Power Provided	1100 Watt
Voltage Required	AC 120/230 V (50/60 Hz)

Miscellaneous

MTBF	202,030 hours
Compliant Standards	CISPR 22 Class A, GOST, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, ICES-003 Class A, RoHS, UL 60950-1 Second Edition, KCC, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, EN 55022 Class A

Software / System Requirements

Software Included

Cisco IOS IP Base

Dimensions & Weight

Width	17.5 in
Depth	19.2 in
Height	1.8 in
Weight	17.64 lbs

Manufacturer Warranty

Service & Support

Limited warranty – advance parts replacement – lifetime – response time: next business day – Technical support – consulting – 90 days

Environmental Parameters

Min Operating Temperature	23 Degree Fahrenheit
Max Operating Temperature	113 Degree Fahrenheit
Humidity Range Operating	10 – 95% (non-condensing)
Min Storage Temperature	-40 Degree Fahrenheit
Max Storage Temperature	158 Degree Fahrenheit

sales@d-ziner.com
833-375-8324
Mon - Fri 9 AM - 5 PM Eastern Time

New CISCO WS-C3850-12X48U-S 48 Ports Manageable Layer 3 Supported Network Switch

What is the price of WS-C3850-12X48U-S?

Free Ground Shipping to USA