JG091B HPE FlexNetwork 5120-24G-PoE SI Layer 3 Managed Switch

HPE 5120-24G-PoE+ SI – Switch – L3 – managed – 24 x 10/100/1000 (PoE+) + 4 x Gigabit SFP – rack-mountable – PoE+ (370 W)The HPEFlexNetwork 5120 SI Switch Series are Layer 2 switches that support stacking, static Layer 3 routing, PoE+, ACLs and IPv6. They are campus switches ideal for medium and large enterprise networks. HPEIntelligent Resilient Framework (IRF) technology creates a virtual fabric by managing four switches as one logical device, which increases network resilience, performance, and availability while reducing operational complexity. The FlexNetwork 5120 SI Switch Series can be managed with HPEIntelligent Management Center (IMC) Software for a single view of your entire network.WHAT’S IN THE BOX – (1) HPE5120 24G PoE+ (370W) SI SwitchManaged Access Layer SwitchesThe HPEFlexNetwork 5120 SI Switch Series is ideal for medium and large enterprises looking for a traditional, scalable, fully managed Layer 2 access switch with static IP routing, PoE+, ACLs, IPv6, and support for stacking. The HPEIntelligent Resilient Framework (IRF) virtualizes up to four physical switches into one logical device for simpler, flatter, more agile networks. PoE+ models support up to 370 W of PoE/PoE+ power for phones, cameras and wireless access points; up to 720 W available on the 24-port model with optional accessories. Right size deployment with 8-, 16-, 24-, and 48-port gigabit Ethernet models that include up to 4 SFP ports for fiber uplinks.Advanced Quality of Service (QoS)The HPEFlexNetwork 5120 SI Switch Series delivers a better application experience with classifier-based QoS using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per port basis. Network traffic prioritization with multiple congestion methods include: strict priority (SP) queuing, SDWRR, and SP+WRR.Security ControlThe HPEFlexNetwork 5120 SI Switch Series supports hardware-based wire-speed access control lists (ACLs) for enhanced security and ease of administration without impacting network performance. RADIUS/HWTACACS, SSL, Port Security, and 802.1x and MAC-based authentication deliver enhanced security.Single View of the NetworkThe HPEFlexNetwork 5120 SI Switch Series can be seamlessly managed with HPEIntelligent Management Center (IMC) Software to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management. Remote Network Monitoring (RMON) provides advanced monitoring and reporting capabilities for statistics, history, alarms and events.

MAIN SPECIFICATIONS
Product Description	HPE5120-24G-PoE+ SI – switch – 24 ports – managed – rack-mountable
Device Type	Switch – 24 ports – L3 – managed
Enclosure Type	Rack-mountable 1U
Subtype	Gigabit Ethernet
Ports	24 x 10/100/1000 (PoE+) + 4 x Gigabit SFP
Power Over Ethernet (PoE)	PoE+
PoE Budget	370 W
Performance	Latency (1000Base-T): 3 ?s ? Throughput: up to 41.7 Mpps ? Routing/switching capacity: 56 Gbps
Capacity	Virtual interfaces (VLANs): 4094 ? IPv4 routing table entries: 32
MAC Address Table Size	8192 entries
Jumbo Frame Support	10KB
Routing Protocol	OSPF, RIP, IGMP, static IPv4 routing, static IPv6 routing
Remote Management Protocol	SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTPS, CLI
Features	Flow control, DHCP support, VLAN support, auto-uplink (auto MDI/MDI-X), Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Quality of Service (QoS), Device Link Detection Protocol (DLDP) support, Endpoint Admission Defense (EAD), STP Root Guard, LLDP support, Link Aggregation Control Protocol (LACP), Port Security, Management Information Base (MIB), dynamic ARP protection, DHCP protection, 500KB packet buffer, non blocking ports, Ingress Layer 2 MAC Access Control Lists (ACLs), Strict Priority (SP), Intelligent Resilient Framework Technology (IRF), Smoothed Deficit Weighted Round Robin (SDWRR), IP source guard, Bridge protocol data unit (BPDU)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
Power	AC 120/230 V (50/60 Hz)
Dimensions (WxDxH)	17.3 in x 14.2 in x 1.7 in
Weight	15.43 lbs
Manufacturer Warranty	Limited lifetime warranty
EXTENDED SPECIFICATIONS
General
Device Type	Switch – 24 ports – L3 – managed
Enclosure Type	Rack-mountable 1U
Subtype	Gigabit Ethernet
Ports	24 x 10/100/1000 (PoE+) + 4 x Gigabit SFP
Power Over Ethernet (PoE)	PoE+
PoE Budget	370 W
Performance	Latency (1000Base-T): 3 ?s ? Throughput: up to 41.7 Mpps ? Routing/switching capacity: 56 Gbps
Capacity	Virtual interfaces (VLANs): 4094 ? IPv4 routing table entries: 32
MAC Address Table Size	8192 entries
Jumbo Frame Support	10KB
Routing Protocol	OSPF, RIP, IGMP, static IPv4 routing, static IPv6 routing
Remote Management Protocol	SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTPS, CLI
Encryption Algorithm	SSL
Authentication Method	RADIUS, Secure Shell v.2 (SSH2), HWTACACS
Features	Flow control, DHCP support, VLAN support, auto-uplink (auto MDI/MDI-X), Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Quality of Service (QoS), Device Link Detection Protocol (DLDP) support, Endpoint Admission Defense (EAD), STP Root Guard, LLDP support, Link Aggregation Control Protocol (LACP), Port Security, Management Information Base (MIB), dynamic ARP protection, DHCP protection, 500KB packet buffer, non blocking ports, Ingress Layer 2 MAC Access Control Lists (ACLs), Strict Priority (SP), Intelligent Resilient Framework Technology (IRF), Smoothed Deficit Weighted Round Robin (SDWRR), IP source guard, Bridge protocol data unit (BPDU)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
RAM	128 MB SDRAM
Flash Memory	128 MB
Status Indicators	Power
Expansion / Connectivity
Interfaces	24 x 1000Base-T RJ-45 PoE+ ? 4 x Gigabit LAN SFP ? 1 x console RJ-45 management
Power
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Miscellaneous
Rack Mounting Kit	Included
Compliant Standards	ETSI, CISPR 22 Class A, GOST, EN 61000-3-2, NOM, EN 61000-3-3, EN55022 Class A, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, WEEE, FCC Part 15 A, ANATEL, FDA, EN 60825-1, ANSI C63.4-2003, EN 60825-2, EN 61000-3-2:2006, VCCI Class A, EN 61000-3-3:1995+A1:2001+A2:2005, AS/NZS CISPR 22, EMC 2004/108/EC, EN 300 386 V1.3.3, FCC CFR47 Part 15 A, CAN/CSA-C22.2 No. 60950-1
Dimensions & Weight
Width	17.3 in
Depth	14.2 in
Height	1.7 in
Weight	15.43 lbs
Manufacturer Warranty
Service & Support	Limited warranty – lifetime
Environmental Parameters
Min Operating Temperature	32 F
Max Operating Temperature	113 F
Humidity Range Operating	10 – 90% (non-condensing)
Min Storage Temperature	-40 F
Max Storage Temperature	158 F
Humidity Range Storage	5 – 95% (non-condensing)